Vaporesso Armour Octa 220W: Product Overview
The Vaporesso Armour Octa is a high-powered sub-ohm vape kit designed around the AXON 3.0 chipset. It operates with two 18650 batteries, sold separately, and offers adjustable output from 5W to 220W.
The kit includes an iTank T with a 6ml e-liquid capacity in the standard version, along with two GTi dual mesh coils: a pre-installed 0.2Ω coil and an additional 0.4Ω coil. A 0.96-inch TFT colour screen displays device information and settings.
Its body is rated IPX8 for water resistance and IP6X for dust protection. The device also includes several operating modes, a screen lock and built-in electrical protections. It is available in six colours: Aero White, Dark Black, Rally Blue, Rust Bronze, Titanium Grey and Vintage Green.
What's Included in the Box?
The Vaporesso Armour Octa kit includes:
- 1 x Vaporesso Armour Octa 220W mod
- 1 x iTank T tank
- 1 x 0.2Ω GTi dual mesh coil, pre-installed
- 1 x 0.4Ω GTi dual mesh coil
- 1 x USB Type-C charging cable
- 1 x Silicone plug
- Spare O-rings
- 1 x Spare glass tube
- 1 x Spare tank protector
- 1 x User manual
- 1 x Warranty card
Not included: Two 18650 batteries and e-liquid.
IPX8 Water Resistance and IP6X Dust Protection
One of the defining features of the Armour Octa is its protective construction. The device carries an IPX8 water resistance rating and an IP6X dust protection rating. The supplied product information states that its water resistance was tested at a depth of 1 metre for more than 30 minutes.
The body is also described as drop-tested and finished with a scratch-resistant coating. These construction features are intended to provide additional protection during everyday handling. However, water resistance does not mean the device is suitable for intentional submersion or use in every wet condition. Follow the manufacturer's care instructions and keep the charging connection dry.
AXON 3.0 Chipset and Operating Modes
The AXON 3.0 chipset provides several operating options, allowing users to adjust the device according to the installed coil and their preferred settings.
|
Mode
|
Description
|
|
Variable Wattage
|
Adjust the output from 5W to 220W
|
|
Smart Mode
|
Detects coil resistance and provides a recommended wattage range
|
|
Boost Mode
|
Provides increased power delivery at the start of a draw
|
|
Pulse Mode
|
Adjusts power delivery during a draw
|
|
ECO Mode
|
Offers a power efficiency setting when battery levels are low
|
|
TC Mode
|
Temperature control for compatible coil wires
|
Available modes and compatibility depend on the device configuration. Refer to the manufacturer's manual for instructions and supported settings.
GTi Dual Mesh Coil Guide
The iTank T is compatible with Vaporesso GTi coils. The supplied coil information lists the following recommended wattage ranges:
|
GTi Coil
|
Recommended Wattage
|
|
0.15Ω GTi Mesh
|
75W to 90W
|
|
0.2Ω GTi Mesh
|
60W to 75W
|
|
0.4Ω GTi Mesh
|
50W to 60W
|
The kit includes the 0.2Ω and 0.4Ω coils. The 0.15Ω coil is listed as a compatible option in the supplied coil guide but is not included in the box. Always check the coil's printed wattage range before use.
iTank T: Capacity, Filling and Coil Installation
The Vaporesso Armour Octa comes with the iTank T, which has a standard e-liquid capacity of 6ml. A 2ml version is also listed for TPD markets.
The tank features a sliding top-fill cap and top airflow. GTi dual mesh coils fit into the tank without requiring tools for installation.
To fill the tank, follow the manufacturer's instructions:
- Open the sliding top cap.
- Add compatible e-liquid through the filling port.
- Avoid overfilling and close the cap securely.
- When installing a new coil, allow the coil cotton to absorb e-liquid before use.
- Begin within the coil's recommended wattage range.
Allowing a new coil to saturate before use helps reduce the risk of burning the coil's cotton. Check the manufacturer's instructions for the recommended priming procedure.
Product Specifications
|
Specification
|
Details
|
|
Brand
|
Vaporesso
|
|
Model
|
Armour Octa 220W
|
|
Product Type
|
Dual battery sub-ohm vape kit
|
|
Power Output
|
5W to 220W
|
|
Chipset
|
AXON 3.0
|
|
Display
|
0.96-inch TFT colour screen
|
|
Charging
|
USB Type-C, DC 5V and 2.5A
|
|
Batteries
|
2 x 18650, sold separately
|
|
Tank
|
iTank T
|
|
Tank Capacity
|
6ml standard version, 2ml TPD version
|
|
Compatible Coils
|
Vaporesso GTi dual mesh coils
|
|
Included Coils
|
0.2Ω pre-installed and 0.4Ω
|
|
Water Resistance
|
IPX8
|
|
Dust Protection
|
IP6X
|
|
Connection
|
Threaded 510
|
|
Dimensions
|
146.3 x 55 x 30.8mm
|
|
Colour Options
|
6
|
Available Vaporesso Armour Octa Colours
The kit is listed in six colour options:
- Aero White
- Dark Black
- Rally Blue
- Rust Bronze
- Titanium Grey
- Vintage Green
Check the product page for the colours currently available.
Battery Requirements, Dimensions and 510 Compatibility
The Armour Octa measures 146.3 x 55 x 30.8mm, making it a larger device than a typical pod kit. It requires two 18650 batteries, which must be purchased separately.
The mod also features a threaded 510 connection. According to the supplied product information, it can accommodate compatible 510 tanks, RTAs and RDAs up to 24mm.
Use compatible, matched batteries and follow the manufacturer's battery installation and charging instructions. Do not use batteries with damaged wrapping or visible damage. The kit does not include batteries or e-liquid.
Who Is This Kit Designed For?
The Vaporesso Armour Octa is a sub-ohm kit with a high adjustable power range and a dual battery configuration. Its specifications may be relevant to adult users comparing:
- Devices with output adjustable up to 220W
- Dual 18650 battery systems
- Sub-ohm tanks with replaceable GTi coils
- Devices with a colour display and multiple operating modes
- Kits with stated water and dust protection ratings
It is a larger, more configurable device than a basic pod system and requires separate batteries and e-liquid.
Delivery and Payment Information at Vapor Dubai
According to the supplied store information, Vapor Dubai offers delivery across the UAE, including Dubai, Abu Dhabi and Sharjah.
Listed payment options include:
- Cash on delivery
- Card payment
- Payment link on delivery
Check the store's current delivery coverage, payment options and product availability before ordering.
Frequently Asked Questions
Are batteries included with the Vaporesso Armour Octa?
No. The kit requires two 18650 batteries, which are sold separately. E-liquid is also not included in the box.
What is the maximum power output?
The Armour Octa offers adjustable power from 5W to 220W through its AXON 3.0 chipset.
Which coils come with the kit?
The box includes a pre-installed 0.2Ω GTi dual mesh coil and an additional 0.4Ω GTi dual mesh coil.
Which GTi coils are compatible with the iTank T?
The supplied compatibility information lists 0.15Ω, 0.2Ω and 0.4Ω GTi mesh coils. Check the recommended wattage printed on the specific coil before using it.
What is the tank capacity?
The standard iTank T holds 6ml of e-liquid. A 2ml TPD version is also listed.
Is the Vaporesso Armour Octa waterproof?
It has an IPX8 water resistance rating. The supplied information states that it was tested at 1 metre for more than 30 minutes. This rating does not mean the device is suitable for unrestricted water exposure. Follow the manufacturer's care instructions.
What does the AXON 3.0 chipset offer?
The chipset includes Variable Wattage, Smart, Boost, Pulse, ECO and TC modes. The available functions depend on the compatible coil and device configuration.
How do I fill the iTank T?
Open the sliding top-fill cap and add compatible e-liquid through the filling port. Close the cap securely and allow a newly installed coil to saturate before use.
What colours are available?
The six listed colours are Aero White, Dark Black, Rally Blue, Rust Bronze, Titanium Grey and Vintage Green. Availability may vary.
Does Vapor Dubai deliver across the UAE?
The supplied store information states that delivery is available across the UAE, including Dubai, Abu Dhabi and Sharjah. Check the store for current delivery and payment details.
